Gindre Copper

GINDRE is a specialized copper manufacturer from the copper bar to the most sophisticated copper component. The range for GINDRE products can be summurised as below:
1) FLAT COPPER BARS:
• Width from 3/16" to 10". Thickness from 1/16" to 2 3/4". Cross section up to 11.5 Sq inch.
• Length up to 31' (depending the cross section), with a standard length tolerance of 4".
Upon demand this length tolerance could be 3/16". Standard tolerances for straightness and edgewise bow : 1/16" / 1/8"
• Tin plating 1 to 20 microns. Silver flash.
2) ROUND SQUARE HEXAGONAL COPPER BARS:
• Square copper bars from 3/16" up to 2 3/4",
• Hexagon copper bars from 5/16" up to 2 3/8".
• Length up to 20'. Tolerance on length : standard 2 1/8".
3) TECHNICAL COPPER PROFILES MADE TO SPECIFICATION:
• Cross Sections from 0.10 Sq inch up to 11.5 Sq inch
• Length up to 31' (depending the cross section).
• Every profile is designed according to the plan provided.
• All characteristics : mechanical, dimensional, surface quality, contact surface, surface treatment,
are included in precise specifications.
• Certain profiles can also be delivered in rolls, depending on their format and nominal section.
4) FLAT IN COIL:
• width from 3/4" up to 4 3/4", thickness from 1/16" up to 1/2", maximum cross section 2.2 Sq inch.
5) FLAT COPPER WIRES:
• SIZES : width from 1/16" up to 1 3/8", thickness from 1/32" up to 5/16", cross section from 0.005 up to 3.87 Sq inch.
• Standard tolerance : +/-1%, with a minimum of 0.001"
6) WIRE ROD:
• SIZES : diameter from 1/32" up to 5/8"
• PLATING : tinning, silver

CATALOGUE- Gindre Copper